Male NPTF x Push-on Hose Barb

Houston Texas Location Closed

Due to Hurricane Beryl's impending impact, our Houston, Texas location will be temporarily closed for the safety of our employees and customers. Thank you, and stay safe!

unknown | en

2720404CLF - Male NPTF x Push-on Hose Barb

2720404CLF

View Similar Products

Dixon Distributor?

Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.

Attributes
Details
Resources
Related Products

Attributes

Weight	0.043 lb
Break Quantity	0
Optional Package/Box Quantity	0
Material	Lead-Free Brass
Component Material	Yellow Plastic Cap
Male Thread	NPTF
Temperature Range	-40°F to 150°F
Length	1.61"
Hose ID	1/4"
Hex	9/16"
Male Thread Size	1/4"
Pressure Rating	350 PSI

Details

Applications

For use where "Lead Free" fittings are required
For use with potable water

Construction

Lead free brass <=0.25% lead
Alloy C27540

Installation

Assembly Instructions:
1. Trim hose end with smooth square cut.
2. Lubricate either push-on fitting, hose or both.
3. Insert push-on fitting into hose until first barb is in hose.
4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

Disassembly instructions:
1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Note

No hose clamps or ferrules are needed
Swivel is for assembly convenience only, not for live swivel applications

Safety Notes

Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.