Imagen

2740404CBC - Conexiones Push-On Hembra NPTF x Barbas para Manguera

Dixon Distributor? 

Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.

Atributos

Peso
0.047 lb
Break Quantity
0
Paquete Opcional/Cantidad por Caja
0
Material
Latón
Material de Componentes
Tapa de latón
Rosca Hembra
NPTF
Rango de Temperatura
-40°F to 150°F (-40°C to 65.6°C)
Longitud
1.51"
DI de Manguera
1/4"
Hex
5/8"
Valor de Presión
350 PSI
Tamaño de Rosca Hembra
1/4"-18

Detalles

Installation

  • Trim hose end with a smooth square cut.
  • Lubricate either Lok-On fitting, hose or both.
  • Insert Lok-on fitting into hose until first barb is in the hose.
  • Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from the end. Push with a steady force until the end of the hose is covered by the yellow plastic cap.

Note

No hose clamps or ferrules are needed

Safety Notes

  • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Lok-On fittings will properly grip Lok-On hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.

Specifications

  • Number of Barbs: 2
  • Barb Length: .77"
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

Recursos